Framer's Solid Belt Ready Ship
Badger’s take on the big American framing rig, the FSU. This tool belt will provide plenty of room for your tools and fasteners while cutting back on trips to refill. All FSU sets come with a contoured belt with metal Cobra buckle to help support and distribute the added weight framing bags demand. Currently all FSU sets come with our XL size bags. We feel it suits the needs of the professional framer best in this size. These are our longest bags at about 17″ from top to bottom. Keep that in mind if length is a concern.
F1 Configuration: Tape pouch, 5 tool slots in main pouch-three along inside back and two inside front, two stacked lower pouches with tool slot in the middle one, rear tool loop. Pencil/utility combo up front with three narrow slots and one deep pocket. Overall length is approximately 17″. F1 side also comes with a hammer sleeve.
F2 Configuration: Tape pouch with 4 interior 1″ wide elastic slots, speed square slot in main pouch with wide tool slot below, fastener pouch with slot, lower fastener pouch, two front tool pockets, 2 stacked rear tool slots and a reinforced bar sleeve on the underside of the bag. Overall length is approximately 17″.
As with all Badger bags, the bottom of the main pouch is reinforced with USA made tactical webbing to increase puncture and abrasion resistance.